MME42

MME42
Communication Module LAN/Ethernet (TCP/IP)

MME42

Opis produktu (rozwiń/zwiń)

MME42 is a device that allows communication between a PC (with AFS42 connected to a LAN) and a AFS42 panel. This allows you to configure the panel, read events, and print the report from a computer program.

The MME42 module can also be used for connections over the Internet. This allows remote diagnostics and system configuratio

Zasada działania (rozwiń/zwiń)

n. The MME42 device is equipped with an electronic microprocessor chip. It has a built-in RS485 converter. The device has three connectors: RJ12/MC4 (RS485) for connecting the AFS42 and RJ45 to connect the local computer network-LAN (cables are not part of the MME42 module).

Three connections are taken directly from the enclosure:

  • RJ45-for connecting the module to a LAN network,
  • RJ12 and MC4 (detachable screw socket)-for connecting the module to the AFS42-power unit and the RS485 communication line (wires: A and B)

The MME42 network module works fully automatically and does not require any other installation of the current service. On the side of the AFS42 (RS485-connector RJ12/MC4), in addition to the communication signals A and B, 12V Power is supplied. The work of MME42 comes down to the conversion of data transmitted from the program AFS42 (on PC via LAN) to the form of data in the form of RS485 interface signals of the panel AFS42 and the conversion in the opposite direction i.e. The RS485 interface signals to the data in the Ethernet protocol.

Description of the signalling lights:

1. Red light-flashes when the module receives the correct frames from the panel side (this does not mean that the module has permission to communicate with AFS42)

2. Yellow light-flashes during normal operation of the Unit; Indicates the correct power and operation of the CPU in the MME module

3. Green data transmission indicator on LAN (TCP/IP)-flashes during data transmission, lights up when the Ethernet connection is correctly connected.

The AFS42 panel provides galvanic isolation of the RS485 connector, so that the MCU42 (USB) module is separated.

Before connecting to the panel, you must allow the MME42 to work with the panel settings by going from the main menu to the SETTINGSMMX menu and selecting the on-SYSTEM setting to YES for one of the specified MMX modules.

The MME42 module in addition to the panel configuration also allows you to download (and print) events and remotely work with the control Panel (uploading the LCD screen and buttons) from your computer.

Dane techniczne (rozwiń/zwiń)

Supply voltage 24V DC (with AFS42)
Current consumption 100-200mA
Operating temperature 0 ° c to + 40 ° c
Relative humidity up to 80% at 40 ° c
Housing plastic
Dimensions 134 x 77 x 31 mm
Weight with cables 110g ± 5g

(32) 754 54 54
(32) 754 54 5

5Common 9, 32-300, Olkusz
NIP: 6372182383